3/16 for a metal line. And rubber brake lines don't have sizes.
It is important to have functioning brakes on a car. A brake line diagram for a 1994 Econoline E-350 RV can be found in its maintenance manual found at auto part stores.
So the line can flex between the body and the frame/chassis.
The vacuum line diagram should be underneath the hood, and the other information can be obtained by either buying a book at your local parts store, or by going to a Public Library.
Any sudden brake loss can be the cause of 1. brake line damage 2. master cylinder disfunction
most likely a clog in the line or wheel cylinder or maybe a broke spring
3/16 brake line
Autozone.com has an illustrated repair guide for the 1995-1998 Windstar on-line! See link below under "Related Links"
What size is the steel brake line tubing on a 1994 Ford Ranger
80 dollars per axle. 320 dollars for all 4 wheels.
Yes, there is a brake line diagram for the 1991 Ford Tempo. It is found in the cars repair or maintenance manual.
No
You might want to check your main vacuum line
3/16"
The brake lines on a Ford Escape are replaced by removing the wheel, unscrewing the brake line at the wheel cylinder, and then at the distribution valve. New lines can then be set into place and screwed into the appropriate connector.
replace the brake line and then bleed the brakes
It's 3/16 steel line
Replacing the wheel cylinder is just a couple of extra steps to a 'normal' drum brake job.Disconnect the brake line from the wheel cylinderRemove the 2 mounting boltsBleed the brakesNot sure if the cylinder should be 'primed' with fluid - hopefully the part will come with instructions.See "Related Questions" below for more