5/16" supply 1/4" return.
The Villager does not have a test port. You need to tee into the line at the fuel filter.
The Villager does not have a test port, you need to tee into the line near the fuel filter to test pressure.
If you mean the fuel pressure regulator, it's on the end of the fuel rail near where the fuel line attaches.
You'll need to install a tee into the line by the fuel filter to check it, there is no shrader valve.
There is no shrader valve on these vehicles, the only way to check fuel pressure is to tee into the fuel line by the fuel filter.
Under hood, driver side, rear engine area, driver side of master cylinder, mounted in fuel line.
Check at the line out of your fuel filter
You don't. The faulty line must be replaced.
Probably either under vehicle or at the passenger side shock tower - follow fuel line from tank
hi, the fuel filter is located just under the brake fluid container next to the master cylinder. the filter is not expensive and is very easy to change, i know because i have done it to my 95 villager. you out... standing in front of car looking at engine, it is on the right side on firewall. big silver cylinder with rubber line coming out of top and bottom. walmart i think carries them.
Along the frame on the left side about half way back. Make sure you relieve the fuel line pressure first or you will end up with a gasoline bath.
First off, a 1995 Dakota is fuel injected. The fuel line hooks to the injector rail.First off, a 1995 Dakota is fuel injected. The fuel line hooks to the injector rail.