3/4 inch or 19 mm
3/4 inch or 19 mm
3/4 inch or 19 mm
open the back gate on the liberty and there will be nuts there- remove with nut driver or socket and carefully swing out lens- will be sticky so be careful!
The factory lug nuts need a 19mm or 3/4 inch socket.
there is a special socket that comes with the vechicle to be used on the lug nuts that hold the tire in place
The lug nut (stud) size I have found listed are for 2002 and up Jeep Liberty-1/2x20
The tire on a Jeep Liberty is changed by loosening the lug nuts, jacking up the vehicle, removing the lug nuts, and taking the tire off. A replacement tire or spare is then place over the wheel studs and the lug nuts tightened down.
5 lug nuts per wheel
19 mm
The most common sizes for lug nuts are 19mm and 21mm. 21mm lug nuts are generally found only on 3/4ton or heavier light trucks and very high performance cars. You 2010 Jeep Liberty uses 19mm lug nuts with a 12mm x 1.5 thread pitch.
Spindle nuts very from 30mm to 34mm
The socket size for the front axle nut on a 2004 KIA Rio is typically 32mm. It is recommended to verify this size with the specific vehicle to ensure a proper fit.
A 2007 Jeep Grand Cherokee has twenty lug nuts.
Thread size is 9/16-18. Need a 7/8 socket for removing the lug nuts. Bolt pattern is 5 on 5.5"