answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2017-06-17 12:43:12
2017-06-17 12:43:12

The spark plug gap for a Briggs and Stratton 13 horsepower engine should be .030 inches. A spark plug for this engine may be purchased at an auto parts store.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


what is the champion cross reference for a briggs and stratton spark plug 691043


The spark plug gap for a Briggs and Stratton 13 horsepower engine should be .030 inches. A spark plug for this engine may be purchased at an auto parts store.


0.030 is the gap for briggs and stratton 4.5 hp mower


what plug size fits a 3.75 briggs and stratton,and a 19.5 briggs engine and what is the gap. thank you


The proper spark plug for 4hp Briggs & Stratton is a J8 which I use in all my motors.


briggs and stratton motor, autolite 3924 plug


Go to this link and it outlines all Briggs and Stratton engine types and spares including spark plugs. http://www.manddsmallengine.com/briggs/parts/ Most common plug used in B&S is a RJ19LM


The type of spark plug will depend on the type of Briggs &ÊStratton engine and equipment configuration. However, for the spark plug gap, the common setting is 0.030 inches.





The correct gap for the spark plug of a Briggs and Stratton 6.75 Lawnmower engine 0.030. Most new plugs come with that gap, but it is best to check to make sure.


The thickness of a cardboard from a cigarette box.


not getting fire 4.75 briggs statton lawn mower


If you have a different brand spark plug, Champion will have a cross reference. You just need the number from the plug. If you do not have that, you will need the model number from the engine. Briggs and Stratton built a LOT of engines with customizations that may use several different spark plugs. 342 cc is simply not enough information.





try .030 unless it is an Intek OHV and then 0.020"



official site for Briggs and Stratton Spark Plugs is: http://www.briggsandstratton.com/maint_repair/routine_maintenance/choosing_spark_plugs/ The proper spark plug will depend on the type of 6.5 HP motor that you have. Briggs and Stratton made several different ones and the best way to get the proper plug will be to call an authorized Briggs and Stratton repair shop with the mower make and model numbers.


The 14.5 hp ohv Briggs & Stratten engines require a 0.30 in gap




Try 32 thousands, to start, depends on how much compression the engine has at this point.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.