On a 92 van it should be a throttle body fuel injection set up and they need 9-14 psi. If it is a carb it would be 3.5-4 psi
The oil pressure switch on a 1997 Chevy Blazer is located on the bottom of the engine, near the oil filter. It monitors the output and pressure of the oil pump.
That year did not have a fuel pressure regulator. There is no need for one with a carburetor unless you have a electric fuel pump.
The oil pressure switch on a 90 Chevy Camaro is located on the bottom of the engine near the oil filter. It constantly monitors the function and output of the oil pump.
Low pressure connector is at the front of engine below front exhaust manifold behind the electric fan for the rad....
In late 1987 Chevy went to fuel injection fuel system and that requires an electric fuel pump to deliver the correct fuel pressure so the engine will START and RUN. So after 1987 Chevy started putting an ELECTRIC FUEL PUMP inside of the fuel tank on all Vehicles.
Electric fuel pump runs at a pressure of 41-47lbs,the reset is in the tank of the pump itself...goodluck Electric fuel pump runs at a pressure of 41-47lbs,the reset is in the tank of the pump itself...goodluck
torque wrench
The performance specifications at Chevy headers can be found at the nearest Chevy company that sells headers and have the specifications specified as well.
If they are stock then there electric.
THE FUEL PRESSURE ON ALL CHEVY'S 95 AND UP IS 60 TO 65 PSI
Where is the fuel pressure regulator located on a 1998 Chevy van
HELP