0
What is the spring rate in PSI for the stock suspension springs on a Datsun 240Z?
Wiki User
∙ 16y ago
The calculated rate in pounds per inch for the stock front springs on a 1971 240z is ~100 lb/in. The data used was from direct measurement as follows:
8 active coils
0.437 inch coil diameter
4.447 inches spring outside diameter
torsion modulus (G) 11.5 x 10E06 psi
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Will stock Rubicon suspension lift my wrangler SE?
Possibly The SE coils and Rubicon Coils are the same length but the Rubi coils have a stiffer spring rate and you could gain 0 to 2 inches of lift if your springs are sagging
How much lower is the front coil springs on a Chevy extreme compared to a stock s10?
the spring height is 1.25 in. shorter but the spring rate is different and the leaf springs are also different.
Is there any way to lower a stock acura integra with out buying new springs?
No there is no way to lower a stock Acura Integra without buying new springs. Lowering the ride height of a vehicle will require many adaptations to the suspension, including new, shorter springs.
What should be done when a 97 Firebird sits too low in the front with an all stock suspension with new struts?
Springs, not struts set the height.
Will 22's fit on a 2008 Chevy hhr?
22s will fit on the hhr on stock suspension.but if you have a lowered suspension they might rubb!i have 20s on my hhr,with lowering springs.
What is the stock tires size on a 1972 Datsun PL521?
The stock tire size is 195/75/14.
What is stock tire size for 1979 Datsun 620?
215/50R15
Where can you find replacement springs for patio swing?
I would tell you specifically but I have a lot of luck with a lot of spring companies. So just do a general search and you will find lots of companies with stock or custom springs that are willing to help. The replacement springs are not as expensive as you may think. Many of the companies are willing to match springs so save the broken pieces and send them to the companies you find, you can even photocopy the spring to send to them. If you do photocopy the spring place a ruler next to the spring so they may better determine the size.
What size motor is stock for a 71 Datsun 240z?
2.4L or 2,393 cc
How do you lower a Honda Civic?
you can do this by either changing out the entire suspension with aftermarket coilovers or a strut and spring combo or you can just replace the stock sprong with lowering springs. either way you have to remove the stock shock assembly. look up a DIY online they're all over the place and most have pictures. If you don't know what you're doing you may want to consider having a professional do the work.
What is the difference between coil-overs and lowering springs?
They are both coil springs, a lowering spring is shorter and usually has a thicker coil stock or more coils. Also with lowering spring you are set to one high as with coilover you can change your height whenever you want. also with lowering spring you have to buy new struts where the coilover usually come pre assembled with the struts.
What is the max lift on a stock 4.8 valve spring?
Nothing over .500. And I really don't advise going over the stock duration or LSA with stock springs either. If you can't afford the parts, don't modify your engine. You'll do MUCH more harm than good.
