The standard toilet height is the same standard height of a chair which is between 16 to 17 inches. You can order toilets that are higher off the ground than that for older people who have a hard time getting up off the toilet.
A standard toilet roughs in at 12" from the wall.
Countertops are generally high enough to provide clearance for a dishwasher and other standard height appliances. The usual height is 36 inches above the floor. Use the final finished height of the floor (i.e. including tile) so that appliances will fit properly.
Depending on the model, toilets can flush anywhere from .6 (low-flow) to 1.6 (standard now) to 3.5 (older toilets).Gate Tube Toilet Water Saver test conducted at the Stevens Institute of Technology, Center for Environmental Systems in Hoboken N.J., confirm:A 2011 WaterSense designated 1.28 GPF Glacier Bay toilet fixture consumes on average 1.52 gallons per complete cycle.A 1997 WaterSense designated 1.6 GPF American Standard toilet consumes on average 2.07 gallons per complete cycle.A 3.5 gallon American Standard toilet consumes 4.23 to 4.31 gallons per complete cycle.Consumers should be aware that Gallons Per Flush (GPF) does not a represent the total gallons consumed for a complete flush and refill cycle.
4 to 6 inches above the door knob. Some doors are reinforced in this area just for deadbolt installation.
Usually, most people will only use one type of toilet paper and then maybe a baby wipe as well. You will have to find the toilet paper that is right for you.
The height of a standard toilet seat is 14" from a furnished floor.
About 30cm tall
Standard height is 15" but you can get comfort height or ADA models which are 17" high. The standard toilet rough in dimension is 12", which means the outlet of the toilet at the floor is 12" from the unfinished wall, but they do make 10" and 14" rough in models. The width really depends on the type of toilet you get but remember International Plumbing Code requires 15" from the center of the toilet to the nearest wall. Hope that helps.
Because the lower height creates a better angle to facilitate defecation in a clean manner.
They are usually about 24-26 inches high
That depends on who is to use the toilet. children's toilet seats (in schools for example) are much lower than in an apartment and old peoples homes have even higher seats. The Swedish standard toilet height (to the rim not including any seat) is 420 mm.
Will a American standard toilet tank fit a glacier bay toilet
No the standard toilet seat covers are for the standard round toilet seats. The universal will fit the long oblong shaped toilet seats.
toilet rim should be at 10"-11" in height.
Yes, I have an American Standard toilet and an Olsonite toilet set.
There are a variety of terms that relate to toilet bowl height. It is never measured with the seat on. More and more consumers are preferring an elevated bowl height rather than the "standard" bowl height of 14". Previously, these toilets were manufactured for the disabled, and as such, have the designation "ADA". When you see a toilet marked ADA, you know the seat is between 17-19" high.Some manufacturers want to avoid the "disabled" label, so they use various terms: "right" height, "chair height", "tall" height and "universal height". ALL of these terms are interchangeable, meaning the seat is 16" or higher.
The standard dimensions for a toilet can vary depending on the country you live in. The American standard is either 14 or 15 inches.