165 Main Jet
45 Pilot Jet
N1EE Needle
3rd Clip Position
Don't know if they're the same, closest I could find is a 1996 KX250. MAIN- 165 PILOT- 45 NEEDLE- NOZG CLIP - 4TH AIR SCREW- STOCK
jetting on 2000 srx is147.5,146.3,146.3. jetting on 2001 srx is 150, 148.8, 148.8.
Its a 1997 - KX250 Its a 1997 - KX250
65mph maybe with jetting 55-60mph stock I have the monster energy klx140L and stock i can get up to 60 on warm start 40 on cold start.
75MPH Stock, 80MPH With 15 Tooth Front Sprocket exhaust, intake and jetting.
How do i drain the old gas out of my kx250
NO it changes from 01 to 02
Stock it is jetted lean, but here are the stock settings:pilot: 40main: 168needle position: 4needle: OBETPair screw: 1 turn outHere is the jetting that most run on the 250 XCF:pilot: 42main: 170needle position: 5needle: OBETPair screw: .5-1 turn out
Yea the fuel tank will fit
yes but it might take some modification.
IMO, Ratio depends on the carb jetting and oil quality. Try 32:1 (gas:oil) using good synthetic or syn-blend then jet the carb. With stock jetting that should be in the ballpark. Higher altitudes will require leaner jetting (smaller jet size not different gas:oil ratio).
Nope, its 03-07 or 08 and 97(or so)-02