Want this question answered?
No
6"
Absolutely NOT you 2" minimum
In the USA, 15mm is half-inch, and 22mm is three-quarters inch. Lengths of pipe nipples in these sizes range from one and a quarter/one and a half, to six inches, in half-inch increments.
There is actually no question here
Three inches
4 5/16
Yes. You need a 1/2 inch Easy Out.
The take-off for a standard radius 90 is one and one half the diameter of the pipe. Example: 6 inch 90 has a take- off of 9 inches. The take-off for short radius 90 would be the dia. of the pipe. Long radius 90 is 2 times the pipe diameter.
What it's the take out off 12 inch 90
Use a pair of plyers and two small pieces of cork to grab the threaded pipe while you rotate the female fitting. Also, if you don't need the threaded piece anymore, you can use a whole cork inserted into the threaded pipe with a bit of apoxy or super glue.
pipe size(inch)x38.1
this app help you: "Miter Flat Pattern Design" in play.google.com
pipe rench
90 degree angle rolled on a 45
No
If you can access the internal portion of the broken pipe, insert a hacksaw blade and cut through the threads at a perpendicular angle. Be careful not to damage the underlying threads in the pipe in the wall. Then use a flat bladed screwdriver to collapse the damaged pipe at the cut you made, by prying. You may have to make several cuts.