Want this question answered?
poodle
The blue flame of the Bunsen burner is when it is hottest. The yellow flame is the safety flame. you should always start the burner on the safety flame which is produced when the holes on its base are closed.
The yellow flame because that is the safety flame
The yellow flame, with a temperature of max. 300 0C, is used only for the functionality checking of a Bunsen burner. The temperature is too low for heating in many experiments. This is also known as a Dirty flame because of its tendency to cause soot buildup.(you can see this phenomenon in a gas fireplace that is set too high.)
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
The whiter the flame, the hotter.
yellow when fully open if on a bunson burner
fuel rich falme as opposed to oxygen rich flame
Yes it is
poodle
With oxygen closed off and a yellow flame the temperature is about 1000 degrees Celsius.
by opening the lapet freely if u know what i mean peeps
because on the none safety flame you get bigger burns, on the safety flame it isn't as strong
The silent flame on the Bunsen burner is the yellow/orange flame.
You can't it is always the same. You only use the blue flame to heat things because the yellow flame is the safety flame and the blue flame is hotter.
As a safety flame, keep it on this if the burner is not in use :)
yellow flame