you should be able to get a timing book from your local parts store
setting timing on a f150 4.9 6cyl
There is no timing adjustment, The computer controlls the timing.
The timing setting for a 1988 Toyota Tercel is the "3E" hole lines at the top. This setting is for a Tercel EZ 1500 engine.
what are the timing belt setting for a 1993 Isuzu trooper 3.2 ltr v6 ...
0 TDC base timing.
You don't set timing on a carburator or are you asking the timing on the motor
your timing is not adjustable. the pcm controls the timing. your dis. is index.
That requires an OBD2 engine scanner to set the timing. You can NO longer use a timing light.
even with a cam it should be between 10 an 12 degrees
what motor do you have in it
You can set the timing on a Mitsubishi mirage 1997 going to the setting and finding the setting properties. The setup should be the second on the listing.
I need to set the timing belt in my car for a Dodge Stratus 1998, that has a 2.5 motor V6.I do have the timing belt already on the car, but it not on the right setting. Please someone help me with this question about setting the timing belt.
You need a timing light to set the correct timing. Once the truck has been set at base timing at 0-2 degrees by disconnecting the timing wire and setting the dist., the computer adjusts the timing by itself to the proper setting.. There is not an adjustment for the the idle speed on this truck.
set timing on 2000 Kia Sephia
I have a 1990 and factory setting for base timing is 10 degrees, I believe.
Check out my bio page for help on setting your timing.
Timing and idle setting maybe computer controlled and not adjustable. If they are adjustable should be 825-850 RPM
How do you disconnect the Data Port when setting the timing on a 1993 Toyota Corolla?
The timing should not need setting unless you have a failed timing belt or head repair of sorts. after the new parts for the head are all in place set no 1 piston to top dead center, line the cam sprocket and the crank so both timing marks are together going north south put on the timing belt and tighten the pensioner up you have base timing hook up a timing light loosen the distributor and locate the timing window on the bell housing (near the head) mark the recommended setting with a white marker and and the required setting on the window. start the engine and using your light line up your setting or as you desire!
i have uploaded the timing diagram to the following address http://www.savefile.com/files/1572016
The answer should be in your owner's manual in the last few pages near the back.
Just set timing for 4 deg BTDC on my 69 runs great.
how to put the timing on 99 BMW 328i