center nut 180-200 ft lbs. put wheel on ground with tire on for resistance. may be someone hold brakes on.
you need to remove the entire steering knuckle and have a machine shop press out the hub and bearing for you.
Bad wheel bearing, or more than likely a tire with a defect.AnswerIt's normal for a Tempo to hum.
how do you replace front door actuator for 93 ford tempo
This is not an easy job. Best to have it done at your local shop. Labor is about 1 hour per side, bearing cost is around $ 60.00.
there are MULTIPLE bearings in a car...wheel bearing, engine bearing, ect. you need to be more specific.
The front wheel bearing need to be pressed by a press. Unless you have a press, I suggest you take it to a shop that has one and have them do it. The bearings can be found at autozone, or advance auto cheaper than any garage can find them for.
The spark plug torque spec range is between 6 and 10 ft/lbs.
If you mean the nuts holding the axle/bearing assembly, I believe they should be torqued to 230 foot-pounds, or one 160 pound person standing (not jumping) on the arm of the wrench 1.4375 feet from the center.
front or all wheel drive
what size socket for front axle nut 1991 ford tempo
what size socket 92 ford tempo front axle
Its time to replace it.