0
What is the torque specs on the head bolts on a 2003 dodge sprinter 2500 l5-2.7l dsl turbo engine?
Wiki User
∙ 12y ago
First pass, 20 Nm. Second pass, 60 Nm. Third pass, 90 deg turn. Fourth pass, 90 deg turn.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What size is the diesel engine in a 2007 Dodge Sprinter van?
The diesel engine in a 2007 Dodge Sprinter is a 3.0L V6.
Is there a gasoline engine option on a sprinter van?
The 2007 Dodge Sprinter was available with a gas engine.
What is the torque for an 1986 Dodge 318 rod bearing bolts?
the correct torque for these bolts is as follows: 96lbs
Where is the oil drain plug on a dodge sprinter?
On the bottom of the engine.
What is the engine oil capacity of a 2005 dodge sprinter 2.7 engine?
9.5 quarts
Is the engine in the 2008 Dodge Sprinter 3500 a morphed Jeep Cherokee engine?
A version of the 3.0L diesel in the Sprinter is a available in certain Jeep Grand Cherokees.
How do you remove the engine from a 98 dodge ram 5.9L from torque converter The flywheel is in the transmission housing by about 2 inches and I cannot get at the bolts at flywheel torcque converter?
You have to pull the stater and grind a space in the adaptor for a socket to clear to the torque convertor bolts.
What are the head bolt torque specifications for a 1987 Dodge D100?
The head bolt torque for the Dodge 6 cylinder and V-8 engines is 50 ft. lbs. torque. If it is a diesel engine, the torque is 90.4 ft. lbs. Tighten the bolts by working from the center out, and alternating side to side. This prevents warping of the head.
Where do locate an engine block heater on an 2000 dodge sprinter?
The Dodge Sprinter did not come out until 2002. The heater is an add on option that is installed in a freeze plug on the passenger side of the block.
How do you change water pump on 3.5 liter intrepid?
How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.
What are the torque specs for the head bolts on a 2007 dodge charger 3.5 liter engine?
45, 45, 65 ft lbs + 1/4 turn.
What is the torque specification for the cylinder heads on a 2000 dodge ram 1500 5.9 liter 4x4?
95 ft/lbs using engine oil to lube the bolts.95 ft/lbs using engine oil to lube the bolts.
