final torque is 59-64 Nm
except the two in front of the cam sprocket these can only be done up to 12-16Nm
19lbs ft
Torque Value For 1987 R22, Per Haynes Manual - 58 ft lbs.
hhghggg
Value is for parts only. Try e-gunparts.com
M20 -bolt, what is the torque value M24 M24
300kgf.cm
The torque value is 100 ft.lb. or 136 n.m.
it will depend on the year of the model, but the value can range from 2000 to 20000 or more. It will also depend on the mileage, vehicle history, engine, features, etc too.
It really depends on the model, mileage and condition. It could be anywhere from a couple hundred dollars to a couple thousand dollars. To check the value, visit www.kbb.com.
I BELIEVE FOR THE FIRST TIME THE TORQUE VALUE IS 22 FPS. THE SECOND AND THIRD TIME IS 63 FPS. THE VALUES ARE IN THE HAYNES MANUAL. IT ONLY COST 15-20 BUCKS.
For all the 2.3, 2.4L QUAD 4 engines, the head bolts are Torque to Yield. The porper torque value is 30ftlbs PLUS a 90 degree turn of the wrench. The bolts must be new every time ( NEVER REUSE OLD BOLTS). The torque values and proper sequence are including in the box the new bolts come with. BUT honestly, the torque value is 65ft lbs like all GM Chevy motors have been for eons.
torque wrench