Want this question answered?
120 nm.
The wheel torque setting is 76
A torque wrench, usually a power torque wrench
80 ft-lbs. The home mechanic can just use a regular wrench, tighten by hand, then step on the end of the wrench to torque it adaquately (don't stomp on it).
If they're 7/16" studs-80#
In a counter-clock-wise motion us a 19mm socket wrench to loosen. For more leverage use a Torque wrench. The torque wrench would be used to install the lugs nuts to a specified torque setting. For more leverage use a 1/2" drive breaker bar.
100 Ft-lbs for 12mm wheel studs 150 Ft-lbs for 14mm wheel studs
Yes
Use the wheel wrench that came with the car, r&r them one at a time, torque to spec-about 80# for most. Use a torques wrench with the right size socket-don't guess at final torque.
210 nm
Rear wheel bearing nut tork setting
Check the manual, Wheel nut torque, N·m (kgf·m, ft·lbf): 102.9 (10.5, 76)