Want this question answered?
if the bar length is 5o m , what will be the actual length including lap length
when length of reinforcing bar is small and we have to provide longer reinforcement in that case the second bar is provided with proper overlapping with the first bar this overlapping is known as lap length. the straight length of shall not be less than 12mm dia and 200mm length.
Development length is the length overlap of bars tied to extend the reinforcement length. is about 50 times the dia of bar is consider to safe.
I think the bar along the span is main bar
A cover meter determines the distance from the outside face of the concrete to the depth of the reinforcement bar.
if the bar length is 5o m , what will be the actual length including lap length
when length of reinforcing bar is small and we have to provide longer reinforcement in that case the second bar is provided with proper overlapping with the first bar this overlapping is known as lap length. the straight length of shall not be less than 12mm dia and 200mm length.
Development length is the length overlap of bars tied to extend the reinforcement length. is about 50 times the dia of bar is consider to safe.
Anchorage length is the required distance to transfer a load and is dependent on the materials used. Development length is the length of the reinforcement bar or rod required to transfer the load safely to another bar.
It is the length of the main bar provided at the column beam junction or column footing junction to allow for the development of stresses to its design strength.
Unit weight of 22mm dia reinforcement steel bar is 3 kg per metre length - Answer by m. Velsamy mobile 09884585625
I think the bar along the span is main bar
A cover meter determines the distance from the outside face of the concrete to the depth of the reinforcement bar.
shear reinforcement
one trapozoidal section of 0.5 sloping distance is one side and 0.5 is the another side and 1.0 meter is the horizontal base . what will be the cutting length for it.
.888kg/m
the top reinforcement of beam (compression face of beam). it is provided to hold the stirrups in place.