the top reinforcement of beam (compression face of beam). it is provided to hold the stirrups in place.
0.39 kg/metre
Weight is 1.579 kg/m
The prefix 'T' signifies a ribbed bar profile. This is as opposed to a bar with an 'H' prefix which has a smooth profile.
bar cranking is the process of bending up the bottom steel bars in upward direction. it is mainly to prevent upward bending moment near the joint. also useful for attaching stirrup bar efectivly. cranking is also used in two way slabs
cutting length depends upon the beam length. its including L in both sides
Anchor Bar was created in 1935.
It is the length of the main bar provided at the column beam junction or column footing junction to allow for the development of stresses to its design strength.
I think the bar along the span is main bar
structual steel is the widw flange column's and beam's as well as plate steel angle iron ect.. it falls under aws D1.1 welding code. reinforcement steel/reinforcing steel is the rebar, dba,(deformed bar anchor), hsa, (headed stud anchor) that is placed in concrete, floors, walls, footings, ect... it falls under aws D1.4 welding code
A cover meter determines the distance from the outside face of the concrete to the depth of the reinforcement bar.
Beam can take transvesr loading and bar only axial loading
shear reinforcement
.888kg/m
The weight of a 10mm steel reinforcement bar is approximately 0.616 kilograms per meter.
its the rear reinforcement bar under the rear bumper. its also known as a rear impact bar
0.39 kg/metre
Weight is 1.579 kg/m