I think the bar along the span is main bar
A cover meter determines the distance from the outside face of the concrete to the depth of the reinforcement bar.
shear reinforcement
.888kg/m
The reinforcement resisting flexure (bending) in the direction of the span.
Main reinforcements take the load
A cover meter determines the distance from the outside face of the concrete to the depth of the reinforcement bar.
shear reinforcement
.888kg/m
The weight of a 10mm steel reinforcement bar is approximately 0.616 kilograms per meter.
It is the length of the main bar provided at the column beam junction or column footing junction to allow for the development of stresses to its design strength.
its the rear reinforcement bar under the rear bumper. its also known as a rear impact bar
T8 reinforcement bar denotes a type of steel reinforcement bar with a nominal diameter of 8 millimeters. The "T" typically stands for "tensile," indicating its use in concrete structures to enhance tensile strength. This size is commonly used in various construction applications, including residential and commercial buildings, to provide structural support. The T8 bar is part of a standardized classification system for reinforcement bars based on their diameter and mechanical properties.
the top reinforcement of beam (compression face of beam). it is provided to hold the stirrups in place.
0.39 kg/metre
Weight is 1.579 kg/m
The reinforcement resisting flexure (bending) in the direction of the span.
mass=density/volume