Adding more resistors in parallel always decreases the total effective resistance.
So the total effective resistance of an infinite number of them would be zero ohms.
Nice ! To build a superconducting ring, all you need is an infinite number of resistors.
You don't need the liquid helium, and it superconducts at room temperature !
3.333 ohmsHow do we calculate the answer?It is calculated from the "Resistors In Parallel Connection Law" which is:1 / RTOTAL = 1 / R1 + 1 / R2In this case:R1 = 5 and R2 = 10So:1 / RTOTAL = 1/5 + 1/10 = 0.2 + 0.1 = 0.3So:RTOTAL = 1 / 0.3 = 3.333======================================For any number of resistors in parallel . . .Total effective resistance = 1/(1/A + 1/B + 1/C + 1/D + . . . . .)(If you're working with resistor combinations, then you're supposed to know this formula.)If there are only two resistors in parallel, and you use the same formula and simplify it,the total effective resistance turns out to be (A)x(B)/(A + B) .(Just say to yourself "the product over the sum" and you'll remember it.)When the two resistors are 5 ohms and 10 ohms, the total effective resistance is:(5)x(10)/(5+10) = 50/15 = 31/3ohms
Resistors in parallel work just like highway lanes in parallel. -- The more lanes there are, the more traffic they can carry. -- Any number of lanes in parallel are always wider than the widest single lane, and can carry more traffic than the widest single lane can. "wide lane" = low resistance "narrow lane" = "high resistance" "traffic" = "electric current"
False.
A vector quantity is one that has a magnitude (a number), and a direction. No, resistance is not a vector quantity; it is a scalar quantity (only magnitude).
In a parallel circuit voltage remains constant but current will vary with the number of branches (resistors). Remember that Current(amps)=V/R.
The total resistance of resistors in series is simply the sum of the resistance values of those resistors. If the resistors are identical, then you can multiply the resistance of one of them by the number of resistors in the circuit.
If the resistors are in series, then the total resistance is simply the sum of the resistances of each resistor.
Resistance in series is simply the sum of the resistors. RSERIES = SummationI=1,N(RI)
5000 For Parallel resistors: Rtotal = R / N Rtotal is total resistance R = Value of resistors N = number of resistors 15 = 75000 / N N = 5000
The resistors should be connected in parallel .
That depends ... in a very interesting way ... on whether they are connected in series or in parallel. -- If the resistors are in series, then the total resistance increases when you add another resistor, and it's always greater than the biggest single one. -- If the resistors are in parallel, then the total resistance decreases when you add another resistor, and it's always less than the smallest single one.
infinit
We have n identical resistors, call them R1, R2 etc up to Rn. All have resistance R. Resistance of the whole circuit = 1/(1/R1 + 1/R2 + ... + 1/Rn) = 1/(n*(1/R)) = 1/(n/R) = R/n So it's the resistance of one resistor, divided by the number of resistors.
carbon resistors of standard values are manufactured because other values can be obtained by series and parallel combination of standard values. Moreover even standard values do not offer exact Resistance's will have tolerance
1 resistor has 176ohm resistance (in paralel) ---> given current (I) = 5 A Potential difference (V) = 220 V total resistance = V/I = 220/5 = 44 let the number of resistors be x , 176/x = 44 x = 176/44 = 4 therefore the number of resistors is 4. :)
When resistors of the same value are wired in parallel, the total equivalent resistance (ie the value of one resistor that acts identically to the group of parallel resistors) is equal to the value of the resistors divided by the number of resistors. For example, two 10 ohm resistors in parallel give an equivalent resistance of 10/2=5Ohms. Three 60 ohm resistors in parallel give a total equivalent resistance of 60/3 = 20Ohms. In your case, four 200 Ohm resistors in parallel give 200/4 = 50 Ohms total.
The number of resistors and their value. The wire and the junction points have resistance also.