On a 4 wheel drive capable Ford Ranger , the transfer case is bolted to the back of
the transmission and allows power to be transferred to the front wheels
The transfer case for a 4x4 is bolted to the rear of the transmission on your Ford Ranger
Motorcraft MERCON automatic transmission fluid in the transfer case according to the 2002 Ford Ranger Owner Guide
2000 ranger 4x4 i replaced the gem and selector switch no power to transfer case motor
I'm assuming it would be the same as the 1994 Ford EXPLORER transfer case ( MERCON automatic transmission fluid ) I know that's what my 1995 Ford Explorer uses
1.25 quarts or 1.2 liters
How to peplace A RANGER transfer case SHIFT MOTOR
A 4.0 ford ranger will hold 10 quarts of transmission oil. This is if the if the transmission is totally dry including the lines and the transfer case.
Possible, if you switch tailhousings. the transfer case takes a different tailhousing then a 4X2
Behind the passenger side kick panel.
no,output shaft is too long
I'm not a mechanic / technician but the transmission for a 4x4 has a different tailpiece on it so the transfer case can be bolted to it
According to the 2004 Ford Ranger Owner Guide : ( 1.25 U.S. quarts of Motorcraft MERCON automatic transmission fluid is used in the transfer case ) Motorcraft MERCON automatic transmission fluid is also used in the 5 speed manual transmission , approximately 2.8 U.S. quarts