1.5 million dollars
nothing nickel
NP=Nickel-Plate
Danzig helvetia
Did the germans nickel or chrome plate luger models?
Due to the close tolerances of the working parts, its best to purchase a handgun that is already nickel plated. This would be guaranteed by the manufacturer to work properly. If one was determined to nickel-plate a pistol that wasn't made that way, submitting the gun to a person who specializes in nickel-plating firearms.
A microwave cooks from the inside.
Type your answer here... The small parts of a pocket watch and wrist watch were sometimes sandwiched between the top plate and the pillar plate. These two plates held both ends of the various gear shafts in position. Looking at a pocket watch resting face down, the pillar plate would be the lower plate or the plate where the dial face is mounted. However, watchmakers found it difficult to align all the tiny gear shafts at once into one top place and this led to the evolution of the bridge. The bridge was a top plate separated into two or more parts that held the gear shafts in place. If your pocket watch has jewels, they will be fitted into the bridge and pillar plate to reduce friction on the moving gear shafts.
no, you have to have a liscense and be vover 16, get it registered, and have a license plate to drive it on the street or sidewalk.
not military produced lugers. however, some people elected to nickel plate their luger causing the value to go down as much as 30%............
You will need to contact Colt. Prices change often.
25-65 USD
The following Instructions are for all 1991, 92, 93 DeVille Sedans and Coupes.Remove rear license plate.Remove 4 nuts underneath license plate.Separate license pocket (with reverse lights) from body.Remove license plate lamp socket from license plate pocket (1/4 turn counter clockwise)Pull bulb (straight out) from socket.Push new bulb into socket (line up blade to slot in socket).Install license plate lamp socket to license plate pocket (1/4 turn clockwise)Install license pocket (with reverse lights) on to body.Install 4 nuts underneath license plate.Install rear license plate.