When adjusting valve clearances on a 1997 Ford Festiva, inlet clearance is 0.20 mm/exhaust clearances are 0.30 mm. These specs are for models before 11/96 or try 0.50 after this date. Check your rocker cover for a sticker which denotes a newer engine. In that case be sure to check specs. In addition, if the Festiva has a 1.5 motor, the valves are hydraulic therefore need no adjusting. If they sound noisy, attempt a good cleaning with a market approved oil/kerosene but most likely they'll have to be replaced.
reburton2@comcast.net You don't. Valve lifters are hydraulic, they automatically adjust for proper clearance.
How do you get the door trim off a 1997 Ford Festiva?"
CONSIDERING THEY RUN HYDRAULIC LIFTERS... YES IT HARD.
ford festiva stopped while driving it has fuel and power it just wont turn over
Ford did not make a festiva for sale in the us in 1997. They made and sold an Aspire auto trans or straight drive
Usually in or on the gearbox or transmission
I own a 1997 Ford Festiva Trio S 3-door wether it is a belt or chain is dependant upon the model but mine is a belt, and this is usually changed every 100,000 to 150,000 kilometers.
On a 1997 Mercury Sable : The jack is supposed to be with the spare tire in the trunk The spare tire is stored with the tire valve facing down and the jack is stored inside the tire rim
A 1997 Dodge Dakota does not have an EGR Valve.
Could you please tell me if a 1997 Chevy Venture has a heater control valve and if possible the location of the valve.
ValVe adjustment on 1997 oldsmobile cuttlass 3.1
A 1997 Jeep 4.0L does not have a pcv valve. It uses an orifice in the top of the valve cover.