Want this question answered?
what is the torque specifications for a toyota camry 4-cylinder valve cover
The 2001 Nissan valve cover bolt torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
The 2001 Mitsubishi Montero Sport 3.0 liter engine valve cover torque specification is 40 pounds. You do not want to over torque the valve cover bolts, as you may ruin the valve cover gasket.
I was told 7lbs
95 in-lbs.
The 2000 Mazda 1.8 liter engine valve cover torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
I think there is no torque required for the valve cover as long as all are evenly tightened or the seal is flat on the cylinder head it will not cause any leak. If you have tightened the valve cover screws already and there are still leaks you might want to consider putting silicone on the valve cover gasket before you attach it or you might want to consider buying a new valve cover gasket.
Cylinder head cover to cylinder head...torque to 25 Nm (18 ft-lb).
6-8 lb/ft.
According to Chilton's, the Specification for the Spark Plug Tube Nuts, Which bolts the valve cover on, is 33 lbs. The socket size is 30mm. However, I was told by a friend of mine who is a mechanic that he tightens them at 20 lbs.
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
the valve cover gasket is loose and or worn out, try to re-torque the valve cover or replace the gasket