Want this question answered?
Ohm's law states that the current in a circuit is inversely proportional to the circuit resistance. There is a single path for current in a series circuit. The amount of current is determined by the total resistance of the circuit and the applied voltage.
In a passive circuit, the current will decrease. In an active industrial circuit, it will usually decrease. In a theoretic manner - it is an unknown.
V = I * R or I = ( V / R ) I = current (amps) V = Voltage R = Resistance The current in a circuit depends on the applied voltage and the resistance of the circuit.
Six amperes. Use Ohm's law: the current is the voltage divided by the resistance
The power dissipated by a 10 ohm resistor with 800v across it is 64 kw.Ohm's law: current is voltage divided by resistancePower law: power is voltage times current, so power is voltage squared divided by resistanceDon't even think about trying this. 64 kw is a lot of power. The resistor will probably explode, or catch fire. At best, the 80 amps required will trip your circuit breaker, if you are lucky.
The power dissipated by a circuit with a voltage of 12V and a current of 3A is 36W. Watts is Volts times Amps.
When an alternating voltage is applied to a purely resistive circuit, the resulting current is in phase with the voltage.
In both cases, the power dissipated is measured by multiplying the voltage across the circuit by the current through the circuit.
In both cases, the power dissipated is measured by multiplying the voltage across the circuit by the current through the circuit.
current depends on applied voltage and resistance.
Correct Answer= "the current will increase"
Power = (energy used)/(time to use it)Power dissipated by an electrical circuit =(voltage across the circuit) x (current through the circuit)or(resistance of the circuit) x (square of the current through the circuit)or(square of the voltage across the circuit)/(resistance of the circuit)
answer is actually voltage
A circuit has an applied voltage of 100 volts and a resistance of 1000 ohms. The current flow in the circuit is 100v/1000ohms which would equal .1.
Voltage is equal to the Current multiplied by the Resistance.Without changing the resistance, increasing the applied voltage in a circuit will increase current flow. There is a simple, direct relationship between voltage and current. Double the voltage, twice the current will flow. Triple the voltage, and the current will triple. As voltage (E) equals current (I) times resistance (R), when resistance is fixed, what happens to voltage will happen to current.
V = IR Where, V = voltage I = current R = resistance Thus if resistance is increased with constant voltage current will decrease
The impedance of an electric circuit is the measure of the opposition presented by a circuit when the current and voltage is applied.