Voltage drop is caused by circuit resistance
High resistance on the feeder to the load will cause voltage drop at the load end of the circuit. If this is happening, do the calculations for voltage drop, using the amperage of the load, voltage of the load, the size of the wire feeding the load and the distance from the distribution panel to the load.
The correct question is what is the voltage drop across a resistor or the current flowing through the resistor using Ohm's Law where Voltage = Current x Resistance
If you are working from a generator and many tools are used at the same time, voltage will drop.
the voltage drop means whenever the conductor passing through the supply voltage, according to the resistivity property to reduces the some amount of voltage that drop is known as voltage drop for example the resistance is used to drop the voltage to the circuit.............................................
when a resistor is connected in a circuit it drop some voltage across it.when a circuit have large input voltage then by using a resistor of suitable value we get the desired voltage.
The voltage drop in a line can be decreased by
The effect of diode voltage drop as the output voltage is that the input voltage will not be totally transferred to the output because power loss in the diode . The output voltage will then be given by: vout=(vin)-(the diode voltage drop).
To avoid voltage drop in the coil.
because the voltage likes to drop
The voltage drop in a wire has nothing to do with the insulation. Voltage drop has to do with the cross sectional area of the wire.
Voltage is the potential difference between the source & any point in the circuit. The forward voltage is the voltage drop across the diode if the voltage at the anode is more positive than the voltage at the cathode (if you connect + to the anode). Voltage drop means, amount of voltage by which voltage across load resistor is less then the source voltage.
It will decrease the voltage drop.