120 V
Can not do it without knowing the voltage I = E/R. Amps = Voltage/Ohms.
ohms=amps/volts Amps= volts/ohms Volts = Amps*Ohms
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
voltage! measured in volts. current X resistance = voltage simple ohms law
E = I R = 22 x 7 = 154 volts.
60 Ohms
Ohm's Law: Voltage = Amperes times Resistance 9 volts = amps * 10 ohms amps = .9
Very basically, simply divide the voltage by the amperage. Thsi is not for calculating Ohms of resistance, just Ohms. For example, a 9 volt battery that delivers 3 amps has 3 ohms. To calculate ohms of resistance we use the ohms law. This measures the difference in current flow in amps (amps/current is amount or volume of flow, volts is power pushing that current, sort of) and voltage. For instance, measure the amps and voltage at the source and record the ohms. Then record the same at the end point the difference in ohms is ohms of resistance. So, if we measure 10 volts and 2 amps at the source we have 5 ohms. at the end point we have 8 volts and 1 amp we have 8 ohms. therefore we have 13 ohms of resistance. 1 Determine current. Current is the flow of electricity measured in amps. For example a current has four amps in the circuit. 2 Determine voltage. Voltage is the difference in electrical potential from two points, measured in volts. For example, there is two-hundred volts in a circuit. 3 Divide voltage by current to calculate resistance. Resistance is measured in ohms. In the example, two-hundred volts divided by four amps equals fifty ohms. 4 To get ohms of resistance, measure the end point. at the endpoint we have 100 volts and 2 amps=50 ohms. therefore we have 100 ohms of resistance
V=I*R Where: V is voltage I is the current in ampers R is resistance in ohms. So, if the current is 15 A and the resistance is 5 ohms, then the voltage must be 15 A *5 ohms = 75 V.
voltage (volts) current (amps) resistance (ohms)
14v
12 volts