Answer for USA, Canada and countries running a 60 Hz power supply service.
220V in US, supplied as two separate 110V feeds. Your circuit breaker panel supplies both to large 220 V appliances (stove, A/C) and 1 leg=110V to regular circuits.
Lamps do not produce electrical energy, they consume it. The voltage at a lamp depends on the voltage of the local supply. That can be switched on or off to each individual map, or groups of lamps if required.
About 80% are caused by human activity, but sometimes not intentionally. For example, if a hydro pole falls and starts a fire, that is caused by human activity, because we built the hydro pole. If a campfire isn't put out properly, that is also considered human made, because we caused the fire by not putting out the campfire.
Answer for USA, Canada and countries running a 60 Hz supply service.The difference between a double pole switch and a single pole switch is the use of the switch in the installation or equipment. A double pole switch is used when the voltage from two circuits has to be broken. An example of this is a 240 volt supply. A single pole switch is used where there is only a single supply voltage that has to be broken.
The flow of current has nothing to do with magnetism. It will flow in any direction you want, depending on the applied voltage.
there is no answer a single pole socket is a 120v and a double pole is 240v if you are talking about contactors it is completely up to the appliance but a double pole double throw is just as safe as a single pole single throw contactor, Example a single pole single throw will only disconnect the "hot" wire, not the neutral or ground wire and thus no voltage will pass however with a 240 v circuit a double pole single throw only disconnects one "hot" wire and will still have voltage through the circuit (120 volts not 240 though)and is not as safe as a double pole double throw that will disconnect both "hot" lines so no voltage is in circuit If you need electrical work done and do not completely know how to wire it up to code and be safe in the process hire a professional! >>>ITS WORTH YOUR LIFE<<<
240 volts from the secondary side of the transformer to your house
It is a type of transformer that you usually see hanging from a utility pole that feeds your house. It transforms the high transmission voltage down to the usable voltage that is used in the home.
The transformer steps down the voltage from 600kilo volts which is what is at the power pole/lines to multiple strands of 120v or hot wires which is what your house runs off of.
voltage depend on current and resistance r.p.m depend on no of pole
Phase, if you are referring to line, as power line from pole.
Yes, but it has to be up to the specficiation of B.C. Hydro. You have to find out what class of pole that is needed. Is the pole for a secondary drop or a primary installation?
Lamps do not produce electrical energy, they consume it. The voltage at a lamp depends on the voltage of the local supply. That can be switched on or off to each individual map, or groups of lamps if required.
In the United States the common house current is commonly referred to as either 115 volts or 120 volts. The voltage varies due to the distance from the transformer on the pole because electricity loses voltage the further it has to travel.
transformer YES but transmission is 475kv and distribution is 16kv and finally one phase out of a transformer on a pole or on the ground. An electric switch yard will have transformers to reduce to distribution voltage.
Probably your radiator fluid leaking out.
About 80% are caused by human activity, but sometimes not intentionally. For example, if a hydro pole falls and starts a fire, that is caused by human activity, because we built the hydro pole. If a campfire isn't put out properly, that is also considered human made, because we caused the fire by not putting out the campfire.
Legend has it that Santa lives at the north pole. However, his house is invisible because it is magic.