Weight of 25% sulfuric acid per gallon
It depends how concentrated it is.If it is 100% pure, then it weighs 1.840 g/mL, and so 1 gallon weighs 6965.15 g, or 6.965 kg (3785.41 mL per gallon). That's equal to 15.35 lbs.However, it is VERY unlikely that you actually have completely pure H2SO4, and at most normal concentrations, the density of sulfuric acid is very close (but slightly more) than that of water. A gallon of water weighs 8.345 lbs. So a gallon of dilute sulfuric acid will weigh about 8.5 lbs, and a very concentrated solution will weigh close to 15 lbs.
20 degree Baume HCl has a specific gravity of 1.16, so its weight per gallon is 9.66 (pounds per gallon).
40g/ lit of sulfuric acid is is 2.22%
It is 98.086 grams per mole.
Since the inhibitor is almost always a very small addition, the density of inhibited hydrochloric acid is very close to the same as for uninhibited hydrochloric acid. The density depends on the concentration of hydrochloric acid -- stronger acid is heavier. To convert density (kg/l) to pounds per gallon, multiply by 8.34.
It depends how concentrated it is.If it is 100% pure, then it weighs 1.840 g/mL, and so 1 gallon weighs 6965.15 g, or 6.965 kg (3785.41 mL per gallon). That's equal to 15.35 lbs.However, it is VERY unlikely that you actually have completely pure H2SO4, and at most normal concentrations, the density of sulfuric acid is very close (but slightly more) than that of water. A gallon of water weighs 8.345 lbs. So a gallon of dilute sulfuric acid will weigh about 8.5 lbs, and a very concentrated solution will weigh close to 15 lbs.
20 degree Baume HCl has a specific gravity of 1.16, so its weight per gallon is 9.66 (pounds per gallon).
40g/ lit of sulfuric acid is is 2.22%
It is 98.086 grams per mole.
Since the inhibitor is almost always a very small addition, the density of inhibited hydrochloric acid is very close to the same as for uninhibited hydrochloric acid. The density depends on the concentration of hydrochloric acid -- stronger acid is heavier. To convert density (kg/l) to pounds per gallon, multiply by 8.34.
The weight per a us gallon of diesel is about 7.49 lb.
The molar mass of sulfuric acid is 98 grams per mole.
512 GRAMS Divide the quantity by the SG: EG1000 litres divide by 1.28 = 781.25 litres per tonne. dumb*** has to use percent sulfuric acid .4*.391=.1564 *1000=156ml of sulfuric acid 156*1.28=200.2 grams H2SO4 in .4L and is 5.1M
2
4 tonnes
The bulk modulus of a fluid is the measure of its compressibility. In SI units, the bulk modulus of sulfuric acid is 3.0 Newtons per square meter.
9.06 lbs per gallon