The decay rates of organic materials increase with temperature. Materials with a greater thermal stability will remain unchanged for a longer time.
Transistors need thermal stabilization because the operating point of a transistor junction, similar to a diode, is affected by temperature. In fact, this can cause thermal runaway, and device destruction, if the circuit design does not compensate for this. Answer mostly correct but the operating point of a transistor must remain fixed as temperature varies whether going low or higher. that is mainly the concern about. not runaway that is caused by bad design.
Provide thermal stability by keeping winding I2 R losses within design limits and also extend brush life
all the parts in the IC were made together so they have nearly identical characteristicsthe parts are close together in the IC so are probably at nearly the same temperature
Biasing of the transistor is responsible for stability of Q point.
Thermal runaway is not possible in FET because of?
it increases
limited thermal stability
The thermal stability is the ability of the transistor to withstand changes in temperature without the transistor's parameters changing. Transistors generally have poor thermal stability and in particular the Beta parameter increases with temperaure, which can cause thermal runaway in a badly designed circuit. This is well known and the bias current in transistors is normally stabilised by the application of negative feedback in proper circuit design.
Some are latent heat, temperature, thermal conductivity, stability (as opposed to explosiveness), insulation ability which is related to thermal conductivity, and others.
High thermal Stability
to increase the strengthening of material , thermal stability and rigidity..
as metallic nature decreses
An Oil Dielectric Strength Tester is the standard for qualifying Transformer Oil. Thermal Stability would involve heating and then testing. I do not know of a product which controls heat and applies the HV test.
G.R Schneider has written: 'Thermal Stability Tests of Heat Transfer Fluids for Transfer and Storag of Thermal Energy'
- chemical reactivity - thermal stability - flammability - oxydation - reduction
because the bond enthalpy decreases down the group
Transistors need thermal stabilization because the operating point of a transistor junction, similar to a diode, is affected by temperature. In fact, this can cause thermal runaway, and device destruction, if the circuit design does not compensate for this. Answer mostly correct but the operating point of a transistor must remain fixed as temperature varies whether going low or higher. that is mainly the concern about. not runaway that is caused by bad design.