72in-lbs
to what torque must the bolts on the head of a 2000 Hyundai accent be tightened?
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
if the bolts do not get on then you just have to change the studs
You can give your local NAPA a call, they should print out all the torque specs for your car or just give it to you over the phone. At least they do in VA.
To remove the 2002 Hyundai accent rear seats find the tabs that cover the bolts and unbolt them. After the bolts are out lift the seat to remove it from the car.
10mm bolts torque to 18 Ft-lbs 12mm bolts torque to 22 Ft-lbs
torque settings flywheel bolts h100 diesel2007
in the exause right before the bolts the link it together about where your dash is
The front driver side quarter panel on a 2002 Hyundai Accent is mounted with several bolts. Lift the hood and loosen the bolts in the engine bay. Loosen the bolts in the wheel weld, door hinge and to the bumper. Pull and remove the panel outward.
Changing a thermostat in a 1999 Hyundai Accent is very easy. To locate the thermostat, follow the upper radiator hose. The thermostat can be removed by taking off the housing retaining bolts. After the bolts are removed, take the thermostat out and replace with a new one.
The amount of pressure you need to tighten nuts or bolts.