Want this question answered?
420i.
Fn T
Fn T
The torque value is 100 ft.lb. or 136 n.m.
yes
the torque is F.T. [f***ing tight] onset
A crank pulley also known as a crankshaft pulley is an essential part of a car. It transmits the mechanical power and torque, or the force of motion, through the pulley system to additional car elements.
what is the torque for the rear crankshaft cap and flywheel bolts on a ferguson tea.
There are bolt all over the crank and they have different torque values. Here are a few. Crankshaft main bearing cap bolt - 36.5 - 41 .O in. lbs. Crankshaft pulley bolt - 7.5 - 9.0 in. lbs. Crankshaft timing belt pulley bolt - 47.5- 5 4 . 0 in. lbs.
The most logical reason for the key or tip as you call it breaking off is probably a result of improper torque on the crankshaft pulley or the crankshaft pulley is out of balance.To prevent this I would highly suggest buying a new crankshaft pulley that will be balanced.To explain what happens over time the strain of adjusting the belts from the alternator and power steering and air condition pull the crankshaft pulley with varied tension and can cause the crank pulley to warp to a degree causing it to be unbalanced.While this may seem a bit strange the metal will be affected by this due to age,temperature,torque from the belts tensions pulley left and right.Best bet buy a new crankshaft pulley (note just look at the pulley while idling and see if is wobbling) this will tell you the pulley is warped or out of balance.Plain and simple!
60 ( ft. lbs )
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.