usually you have a bad slave cylinder or clutch master cylinder. check the fluid in the clutch reservoir. on drivers side next to brke master cylinder it is a small container with a black 2.5 inc cap if empty fill to fill line and pump clutch pedal until you get some resistance
Soft clutch pedal that goes to the floor. Repeated pumping does not help.
1. Air in the hydrulic clutch line 2. Bent aluminum clutch pedal
check fluid level in clutch master cylinder reservoir
Because it's made of velvet
Yes... You need to get uppers (either soft of hard) that work with a 2004...
Bad clutch slave cylinder or failed soft hose from master to slave cylinder.
It sure sounds like your clutch is done
Several causes are possible, including:Low hydraulic clutch fluid. Check this first since it's a cheap and easy fix.Air in the hydraulic clutch lines.Faulty clutch master or slave cylinder.Worn out, damaged, or faulty clutch.Bent or damaged mechanical clutch linkage.
I believe they are the same as the other soft tail 2004 bikes 1455cc.
If you have a pickup that has a soft clutch and its harder to shift gears you probably have a problem with your transmission. You should check your transmission fluid, make sure its full, and if that doesn't help you will have to take it to a mechanic.
Keerthi Soft was established in 2004.
A "soft" wheelie is done without popping the clutch. It is otherwise known as a power wheelie because it's done with the throttle only.