Possible problem with the caliper, its slides, or collapsed hose. Check for ABS codes. Check that the ABS modulator is not holding pressure to the brake. Check for clogged line or junction. Also there is a check valve on the master cylinder which can hold pressure to both the front left and right rear brake. It is called a "dumping unit" in the diagram, but I have not found a use for it, or a proper explanation for why it is there.
Remove the two slider screws that hold it in place.
18-25 ft lbs.
If the front brake caliper is sticking, the disc may be uneven. Brakes that are left to scrape on the disc for a long time before they are changed will damage the disc enough to cause sticking or slipping.
The caliper might be sticking
If the front brake caliper is sticking, the disc may be uneven. Brakes that are left to scrape on the disc for a long time before they are changed will damage the disc enough to cause sticking or slipping.
brake caliper is sticking due to faulty caliper or rubber brake hose.
STICKING BRAKE CALIPER
On the brake pedal.
On the brake pedal assembly.
Defective caliper, restricted hose, caliper sliders sticking, contaminated brake fluid (probably not contaminated if only 1 front caliper).
Your brakes are sticking could be either the brake caliper or the hose going to the caliper
The main cause of uneven wearing brake shoes is a sticking or stuck caliper. Check to see if the caliper is releasing properly all the time.