Check the supply valves. Chances are the hot water supply valve is not fully opened.
No conversion, it would need to be replaced with a single handle faucet.
The average price for a single hole bathroom faucet can range from 80 to 300 hundred dollars. This will depend on the type of fit and design you are looking for.
absolutely!
Have you got two single faucets or a single lever faucet? It could be a pressure imbalance or it could just need maintenance
Moen part #1920 and a brand new Moen single handle faucet
Need to adjust temperature limit stop on faucet behind handle, on single lever valve.
You need to buy the extractor tool from Home Depot.
Turn the water off to the faucet. Remove the handle. The top of the faucet should unscrew to get to the ball valve. Replace the valve and gaskets then reassemble the faucet.
The U-shaped retainer clip on a shower faucet can be removed by using a pliers to pull it off. The pliers should be a needle-nosed shape to grasp the U-shaped retainer clip more easily.
You have a cross connection on a faucet somewhere in the house. That means the hot is overriding the cold because of a malfunctioning faucet. Usually happens at the tub/shower diverter if it is a single handle.
The correct term would be a single hole faucet. You can not find anything about a single hold faucet on google. Single hole faucets are typically not the first choice of faucets.
The connections on the faucet are pretty much the same for the type of piping you have. They should swap out fairly easily. There is a trim plate available that covers the old holes and gives you the single hole in the center.