Ford recommends a high temp range dot 3 type fluid however in a pinch a regular dot 3 fluid will do but should be replaced with the high temp type when possible
how change brake fluid . i have ford focus lx 2000.ans how change air filter.
On a 2001 Ford Focus : The brake fluid reservoir is used for the brake and clutch systems
To put brake fluid in a Ford Focus, you need to locate the master cylinder, which should be on the drivers side under the hood. On this , you'll find the brake fluid reservoir. You unscrew the cap and replenish using the right brake fluid, and screw the cap back on.
The kind in a can.
by unscrewing it.
In North America ( DOT 3 brake fluid ) meeting Ford specification ( ESA-M6C25-A )
See answer on "How do you change the front brake pads on a 2001 Ford Focus?" for a description of the location of the resivoir. The answer to this exact location is at the bottom of that answer.
Power steering should never go down unless there is a leak found in the system. Therefore, you generally would not need to top up your brake fluid on a ford Focus.
Motorcraft High performance DOT 3 Motor Vehicle Brake Fluid.
The brake fluid reservoir is mounted on the Master Cylinder. Drivers side near the firewall.
DOT ( 3 ) or DOT ( 4 ) brake fluid , according to the Owner Guide
DOT 3 brake fluid