Want this question answered?
If you identify a hazard at work, and it is something that you have the ability and authority to eliminate, do so. Otherwise, call it to the attention of your supervisor, manager, or the safety specialist for your work area.
D. All of the choices are correct.
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
Hazard Light versus Dead BatteryNO, IF the battery is truly dead, then the hazard lights will not work.However, if there is some power left in the battery, even though the voltage may be extremely low, then the hazard lights maycontinue to work.
Faulty hazard switch.
Please look at that sloven homeless man walking down the street. It means please look at the unclean or untidy homeless man walking down the street. John's slovenly work has gotten him fired from his job at a tattoo parlor. that means John's unclean or untidy work has gotten him fired from his job at a tattoo parlor.
The main hazard associated with excavation work is the hazard of being caught in the excavation if it collapses. Soil assessment, sloping of trench walls, and policies on the use of ladders and strong trench wall supports and barriers have been developed to control this hazard.
signal light
A hazard is something dangerous. The workplace is where you work.
try playing with ur hazard lights. mine has a short somewhere and i have to wiggle the hazard light switch then the blinkers work
Why do my hazard lichts keep flashing when car is locked
the hazard switch has two sets of contacts. when hazards turned on, blinkers cannot work,even if hazards dont work.for blinkers to work, hazard sw must be in off position-this reconnects blinker circuits to work normally. BUT-the contacts in the hazard sw get dirty and wont reconnect the blinkers to work