user interface
computer system
AnswerHardware performs the computations, software is a set of instructions we use to tell the hardware what we want it to do.Basically hardware is what carries out the work, and software is what we use, and what we program into it.how does hardware work?If the Q. is what is the HW-SW interface which enables us to use both of them as a system, i would say the instruction set.The Instruction set is the HW-SW interface , instructions are "signals" for the hardware and at the same time appear as instructions to the programmer.This is the bridge between and us the machine.
Audio User Interface
A computer.
music is a type of signl in form of discrete.
To configure the clock rate for the hardware connections on serial interfaces such as network interface modules (NIMs) and interface processors to an acceptable bit rate, use the clock rate interface configuration command. Use the no form of this command to remove the clock rate if you change the interface from a DCE to a DTE device. Using the no form of this command on a DCE interface sets the clock rate to the hardware-dependent default value.
NICs stands for network interface controller. In computer networking, a NIC provides the hardware interface between a computer and a network. A NIC technically is network adapter hardware in the form factor of an add-in card such as a PCI or PCMCIA card.
I think firewalls can be both software and hardware. When you buy computers, it will usually always come with a limited time only antivirus and firewall.
An application programming interface is a form of ICD for a software system, in that it describes how to access the functions and services provided by a system via an interface. If a system producer wants others to be able to use the system, an ICD (or equivalent) is a worthwhile investment.
h=highly a=advancedr=resourced=developed forw=welfarea=andr=regenratinge=enthusim
Component testing
Hardware is any physical component of a computer, Which needs instructions to know how it is expected to operate or use special features built into the hardware. These instructions come in the form of software. They tell a device what it is able to do and how it can do it.