moble 1 50 weight syn
Hi, your Eaton model 6 hydrostatic transmission requires straight 30 weight oil according to the manual.
what kind of oil for a sears push mower and how much?
# 00 Shell Alvania semi fluid grease
I had the same problem When I bought my mower I put premium hydraulic oil in it. It would move until it warmed up. then would slip. I thought I was going to have to buy a new drive. I finally got in touch with an engineer at Eaton Hydrostatic, the place that makes the hydro units, and he asked me what oil I was using. I told him premium hydraulic oil. He said "No wonder. You need to use 30 weight motor oil." I haven't had any trouble since. My mower is a 4211 Hydro, with an Eaton Model 6 Hydro unit that is attached to a peerless drive unit. So if your unit is an Eaton Model 6 or 7, use 30 weight motor oil in it.
i found that the t190 uses hydrostatic hyd oil further research found that transmission fluids are hydrostatic which means you can use either a tractor trans oil or even a torque oil 50 also high temp hyd 100 is also used
What kind of lawn mower are you changing blades on?
it depends what kind..........
Mussels have a sort of exo-skeleton. Their shell.
It can depend on the make and model of the transaxle. But, typically they use a 20W50 motol oil in the transaxle.
Any kind you want.
20-50 motor oil
If you raise the hood of the mower up it should have it on the yellow detailed sticker of mower. Normally 10w30