I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to. I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to.
No, BUT the finish do not last as ling as chrome and they look like crap after a few years
With a quality paint stripper, follow the directions on the container.
meatl
Brass is an abundant alloy and is found in locations throughout the world. Because it is abundant it is relatively cheap.
Steel is stronger.
You must rough up the old finish, use sandpaper. Then apply the heat resistant paint
Fireplace doors are typically made of brass, an alloy of Zinc and Copper. They can be made of other alloys and metals, however, brass is very advantageous as a fireplace door material as it gives a great finish, its strong, easy to clean, non-corrosive, and most importantly heat resistant.
how to remove polyurethane from a brass bed
Copper fireplace sets are better in sense that it has a higher melting point than brass. On the other hand copper has a more dull color than brass and is harder to polish. Since the sets will be outside away from the fire, brass sets are more beautiful and easier to clean.
Not really. If it's that big a concern, the only way to get rid of them is to strip the horn's finish and get it replated.
Yes especially on finish work as Chrome plated Red brass is the right job
I'd get a magnet and remove the brass with that.
with Brasso
I would recommend using a SOS pad, or wire brush. But if those two arent avaible to you sandpaper will work just as well
Brass is the combination of the metals copper and zinc. Its manufacturing process involves melting, hot rolling, annealing and cold rolling, and finish rolling.
A fireplace set should incude tool sets, and especially durable screens. It should have at least one brass animal sculpture, and candelabra candles with the candle holders. Last but not least it should have a hearth decor.
In a Victorian home, I would go with either a brass or pewter finish. If you want to go more classic, you can try a ceramic finish instead.