Want this question answered?
what is the transmission capacity for a 1988 700r4 with transfer case
Advance adapters makes a kit.
It has a model 700R4 transmission and a transfer case is bolted on the back to make it into a 4x4 transmission.
NO. You would also have to change the transmission and install a 2-wheel drive transmission. The center shaft in the 4-wheel drive transmissions are longer so the transfer case will work.
NO. If you keep finding yourself ADDING transmission fluid often and you have no leaks but the transfer case is over full then you need to remove the transfer case and replace the seal in the transfer case where it bolts to the rear of the transmission.
with bolts and tighten
take out 6 bolts from the rear of transmission
No. The 72 Chevy more than likely came with a np203. You will need one of the following to mate with a 700r4 or 4l60e: np208, np231, or np241.
It bolts to the rear of the transmission. It is the part both driveshafts hook to.
I have removed all bolts an linkage, I tried separating the transmission and transfer case and can't get it to come apart
No. The 4WD transmission has a different tail shaft assembly because the transfer case bolts directly to it.
It is the part of the transmission case that bolts to the engine.It is the part of the transmission case that bolts to the engine.