Want this question answered?
The difference between datalink layer flow control and transport layer flow control is the need to keep the different layers of data separate in the flow control option.
Dhcp is Direct host configure protocol. This is used to assign IP address Automatically. In a Domain Environment we must need IP Addresses to communicate with one machine to another to access the resources, their are mainly two ways to configure a IP in a system One is static or manual IP and other is Dynamic or Automatic IP. So DHCP help us to configure an IP Address Dynamically.(Network+ Guide to Networking answer)BOOTP relies on a static table to associate IP addresses with MAC addresses, whereas DHCP does not
Even the smallest LAN technically has a backbone, which could be any of the 4 basic topology types. Any time you need to connect various routers, switches, etc., together you connect them via a backbone cable. A backbone may have its own topology as well,such as a serial bus, parallel, distributed, or collapsed backbone. These topologies do not exactly mirror topologies for a LAN or a WAN.
To recover Facebook password, you need knowledge of computer or contact a professional to help you. I could not recover my password when it was blocked but edwinforex57@gmailcom was the person who helped me to get my Facebook back.
I NEED TO TELL YOU THAT JESUS IS COMING BACK GET READY PEOPLE DONT THINK ABOUT ETERNITY ITS EITHER HEAVEN OR HELL PICK ONE!!!!
i would not wanna do your hw
you need switches to help you see. no switches can not help you see.
only to configure it, after that, no.
Unmanageable Switch -Unmanageable Switches are just working on layer 2 switching.these switches are basically counted under dumb switch catagory.By using these kinds of switches we dont have to do anything, not even IP addresses.These switches are Plug n Play devices.Managable Switches -Managable switches comes under smart switch category.These switches performs on layer2 as well as layer3 switching.By using manageable switches we can perform or manage following services over the network infrastructure -DHCP (Dynamic Host Configuration Protocol)VLAN (Virtual LAN)Layer3 Routingetc..These switches are not Plug N Play devices, we need to manage means we need to introduce them to the network first before using it.
You don't need to configure UDP; this is done automatically by the application protocols that use this transport method.
Before talking about layers you need to figure out what kind of network you are trying to build, how servers, workstations, routers, switches and so on.
delete
you need switches to help you see. no switches can not help you see.
You will need about 12 switches for your setup of 8pcs and 2 printers. You should have extra switches just in case any of the additional switches fail.
A layer 2 switch may need an IP address if the operator wishes to be able to access it without a serial cable. With an IP address, the switch can be access from anywhere with a connection to the network or an Internet connection.
if by BUS you mean Frontside Bus, you dont need to configure anything, it is automatically configured when the computer is made
we need a link layer switch when we need to convert a broadcast communication to a one-to-one communication. But in this case it is already one-to-one communication so we need not use any link layer switches