Depends on the vehicle; could be drum/shoe arrangement with cable actuation; could be rear disc brake pads with cable or could be rear disc brake with inner shoe and drum inside the rotor.
Brake warning light (Canadian) in US there is supposed to be "BRAKE" overlaid on the international symbol. Looks like a brake drum with shoes.
if you remove the rear wheels and brake drum casing there will be what looks like a small bronze-like gear in with the brake drum assembly. you need a specially made wrench to fit this, and then just turn it clockwise until you have reached the tension that you need. usually 10 to 12 clicks of the brake handle is good
Brake drums can be resurfaced by turning the brake drum in a brake drum lathe. When the brake drum has deep grooves in it, it cannot be repaired.
A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.
A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.
The drum and the brake shoes.
In case of cost..drum brake is better than disc brake.
id like to know the same thing. i have a 1995 Honda ATV. and i cant get the rear brake drum off
It looks like the word BRAKE. It is pronounced as BRAKE also.
because the flap looks like a drum
The purpose of a drum brake is to come to a complete stop with any veichle that may have drum brakes in the rear of the car.