Stock 400 quadrajets smoke when fuel drips out of leaky well casting plugs into a hot manifold or if the float level is high. Rebuild kits usually have the leaky well plug problem solved.
Yes, and will work well, however, depending on the make of the carb, you may have to use a base plate adaptor, from square bore, to spread.
No. The 327, is a small block.
The scoop is on top of the hood. It is designed to pull air into the carburetor and make a small amount of extra power.
Try setting timing to "TDC" No. 1 cylinder on compression stroke Make sure firing order is correct Should start at this point and then set timing from there
"The v8 350 is a small block Chevrolet motor.....................it became a big block at 396cubic inches......so anything smaller is a "small" block" this is a little misleading. a 350 is indeed a small block. a 396 is indeed a big block. but you can have a small block that is (internally..cubic inch wise) actually larger than a big block. for example GM made a 400 cubic inch small block. internally it is a larger engine than a 396, but the outer dimensions of the 396 are larger than the 400 small block. and the external dimensions and cylinder head design are what make a small block a small block, and a big block a big block. a small block engine simply has a physically smaller block...a big block is called a big block because it's block is bigger than that of a small block.
You should be able to find a shop manual at your local library with the right info...make copies as they are usually only in the REFERENCE section....good luck:)
No, they did not. The smallest big block Chevy is the 396. They also made a small block and big block 400.
it depends
4.156" bore with a 4" stroke.
No, the Chevy 454 has a long stoke and requires a big block. However, it is possible to build a 454 small block using aftermarket parts. You'll need some high flowing heads to make it work.
Smoke contain many harmfull parcticles of cabon, sulphor and other compound which when get into our lungs blocks the alveoli which are small bags like structue in lungns used to exchage gases so smoke ultimately block lungs and make us difficult in respiration and can also cause many chronic diseases by this like lung cancer
Chevy didn't make an intake manifold for that 94 that you can mount a carburetor to. You will need to purchase one from an aftermarket company.