dc series moter
the universel motor can runs at both ac and dc supply.
Basically AC motors would not work on DC supply but there's however an exception for a Universal motor also known as a series motor. This is the only motor as far as I know that work on both AC and DC.
yes.because the direction of motor is same in both half cycles
As the motor is a three phase machine,it must be AC supply
DC Motor works on DC source and AC motor works on AC source
The Synchronous motors will operate at a constant speed from noload to fullload. Even it is classified as an AC motor, we have to fed the motor both AC and DC supplies. That we have to supply DC to the Field (Normally Rotor) and AC to the Armature (Normally Stator).
There is a motor that is known as Universal motor which works on DC or AC .You might find one in a drilling machine or a domestic grinding machine .But there is a disadvantage ,in that there will be sparking at the commutator between the brushes and the commutator segments due to a shift in the magnetic neutral axis while on AC operation.
no
A dc series motor with speed control can be connected on ac supply because dc machines are totally reversible.
It depends on the motor. The fan is driven by an electric motor, and it can use a dc motor (as in a car) or an ac motor (as in a house). They are not interchangeable.
The diac conducts in both directions at approximately the same voltage, making it unsuitable in an AC to DC supply. The triac also conducts in both directions, based on a gate voltage which is slightly different in the two usable quadrants. That is why the diac is often used to trigger the triac - it makes the two conduction cycles more symmetric. In both cases, the diac/triac does not make sense for an AC to DC supply, but it works well in an AC voltage regulator, such as a lamp dimmer or motor speed controller.
it burns thats it