0
What else can I help you with?
Is a tension wrench and an Alan wrench the same thing?
No. It is not.
Where can you buy a tension wrench?
your local home depot
How do you take the tension off the serpentine belt on 1998 Buick Park Avenue?
Put the proper size wrench or socket on the pulley of the tensioner.Pull the wrench counter clockwise to release the tension on the belt.
What can you substitute for a tension wrench when picking your locks?
A paperclip (look on youtube how to do it).
How do you get tension on an alternator on a 1981 GMC truck 6 cylinder?
With a wrench or socket in one hand and a big pry bar in the other, you must be a multitasker. Lossen the mounting bolts and pry to get tension, tighten while applying steady pressure to the alternator
How do you release the tension to install the serpentine belt on a suzuki aerio?
15 mm wrench Put it on the tension pulley and pull to take tension off belt
How do you relieve tension on serpentine belt of 97 buick park?
put a wrench on the tensioner pully and pull it to release tension on the belt
How do you adjust the belt tension for a 98 Accord to replace the alternator?
Apply a wrench to the center bolt on the pully and turn it will adjust the tension.
How can I properly adjust the tension on my bicycle pedal to ensure a smooth and efficient riding experience?
To adjust the tension on your bicycle pedal for a smooth and efficient riding experience, use a pedal wrench to tighten or loosen the pedal. Start by positioning the wrench on the pedal axle and turning it clockwise to increase tension or counterclockwise to decrease tension. Test the tension by riding the bike and adjusting as needed until it feels comfortable and efficient.
How do you pick a lock with a paper clip?
it is super easy so heres the steps 1. straighten out the paper clip(hairpins work better) 2. take one end and bend it upward like this ____/ 3. next insert into the lock leave it there 4.get a tension wrench(or something to turn the lock with 5 insert the tension wrench into the lock below the paper clip 6 apply slight pressure to the tension wrench while moving the paperclip up and down and moving the tumblers... 7youve got it!! another method is just inserting the paperclip and tension wrench then vibrating the paperclip up and down as fast as you can(this works ive tried it) and your on your way! any other questions email me at gaudettemichael3@gmail.com i answer very quickly!!
How do you replace the belt on a 1992 Chevy Cavalier?
on a 2.2 you just need a 3/8 drive rachet or 15mm wrench to release tension from tensioner.2.4 liter is about the same but you must remove the motor mount.gm Jim
How do you replace a BMW E36 alternator belt?
Release the tension using a wrench etc from the idler pulley.
