0
What else can I help you with?
Is a tension wrench and an Alan wrench the same thing?
No. It is not.
Where can you buy a tension wrench?
your local home depot
What must you never do with a tension wrench?
Hit someone!
Wrench required for 1997 Volvo 850 glt serpentine belt replacement?
3/4" wrench
How do you take the tension off the serpentine belt on 1998 Buick Park Avenue?
Put the proper size wrench or socket on the pulley of the tensioner.Pull the wrench counter clockwise to release the tension on the belt.
Where is the tension pull on a Mitsubishi diamante 1993?
On a 1993 Mitsubishi Diamante, the tension pull for the serpentine belt is typically located on the belt tensioner pulley. This tensioner is spring-loaded and automatically adjusts to maintain the correct tension on the belt. To release tension for belt replacement, you usually need to use a wrench to rotate the tensioner away from the belt. Always refer to the vehicle's manual for specific instructions and diagrams.
What can you substitute for a tension wrench when picking your locks?
A paperclip (look on youtube how to do it).
How do you release the tension to install the serpentine belt on a suzuki aerio?
15 mm wrench Put it on the tension pulley and pull to take tension off belt
How do you release the belt tensioner on a 1994 park avenue?
I have found using a socket with a racket wrench to be the easiest way to do it. When the tension is released the belt can be slipped off the tension pulley. The belt can be replaced the same way. Good luck.
How do you relieve tension on serpentine belt of 97 buick park?
put a wrench on the tensioner pully and pull it to release tension on the belt
How do you adjust the belt tension for a 98 Accord to replace the alternator?
Apply a wrench to the center bolt on the pully and turn it will adjust the tension.
How do you remove the belt tensioner on a ford winstar v6?
To remove the belt tensioner on a Ford Windstar V6, first, relieve the tension on the serpentine belt by using a wrench or ratchet to rotate the tensioner pulley counterclockwise. Once the tension is released, slide the belt off the tensioner pulley. Next, unbolt the tensioner from its mounting bracket using the appropriate socket or wrench. Finally, remove the tensioner from the engine bay for replacement or inspection.
