0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where do you put the oil in a Fiat punto?
in the boot ?
What oil do you put in a y reg fiat punto?
Johnsons
How much oil do you put in your fiat punto 1200?
2.8 ltr
What oil to put in a fiat punto 1.2 2002?
Apparently you need 10w/40 semi synthetic oil. 15w /40 is even better tho!
Where do you put the clutch fluid in a fiat punto 96?
MK1 Punto's do not have clutch fluid... Unlike BMWs, Punto's clutch is controlled via cable...
Where can I get a diagram of a Fiat Punto radiator to locate where to put the coolant in?
The Fiat Punto has a radiator which receives coolant in order to keep the temperature down. The diagram of this radiator can be found in the owner's manual.
Where do you put oil in fiat punto 1993?
On the top of the engine (just left of centre) is a little black flap marked olio you need to pull that open.
How much antifreeze in a fiat punto?
i usually put 2 litres of anti freeze an fill rest with water
Fiat punto 1.2 speedgear engine runs ok but when gearbox put in drive there is no power to the wheels and engine just revs What is the problem?
Low cvt oil level or selector control cable
Where do you put gearbox oil on a 1998 fiat punto?
There is a filler level plug, You'll need a 12mm allen key for that. It is located on the front face of the gearbox casing, next to the reverse light switch.
Hi you have a 99 plate fiat punto that has ran out of petrol and wont start again now there is a light on the dash that looks light a petrol pump nossle what could this be?
It is telling you that you have run out of petrol. Put petrol in the tank and this warning light will go out.
You drive a 2001 fiat punto 1.2 mia and lately while braking you are experiencing a grinding and the car jolts when you put the clutch in the grinding stops Does this sound like you need gear box oil?
This sounds more likely that you clutch assembly is giving in........by depressing the clutch pedal you push the release bearing onto the pressure plate and the noise stops. Replace the clutch kit (Clutch plate, pressure plate and release bearing).....ensure to skimm the flywheel when doing so.
