try looking on the engine manifold to see if it says firing order....135246. If it says this like this.... 1 3 5 2 4 6 then the number one cylinder is on the passenger side of the engine 1st one in front then behind that one is 3 and then 5 and starting from the drivers's side front of the engine it's 2 then 4 then 6. ON the distributor cap, you need to know which one is number one to begin with. If you haven't removed the cap, and the engine is in the firing order of 135246, then bump the engine with the number 1 spark plug removed and with your finger, feel the air come up with the cylinder at the top and stop the engine there when it reaches what is called Top Dead Center, that is when the cylinder pushes to the top of the engine and is ready to fire the plug. Then remove the dist. cap and see which on the rotor is pointing towards on the cap and that one is the number 1 plug wire. Then in the oder around the cap its the same as the numbers in the order 135246. IF YOU DONT' GET ALL THIS, GET A CHILTONS MANUAL FROM THE LOCAL LIBRARY AND LOOK IT UP FOR YOUR VEHICLE, IT WILL SHOW YOU PICTURES OF WHAT I AM SAYING. YOU CAN ZEROX THE INFORMATION FROM THE BOOK AND JUST TAKE IT WITH YOU TO DO IT. THAT'S THE EASIEST WAY.
Disconnect the battery, remove the spark plug cables and boot covers, remove and dispose of the old spark plugs. Next, put in the new spark plugs, attach the boot covers and cables and reconnect the battery.
Disconnect the battery, remove the spark plug cables and boots, and remove the old spark plugs. Put in the new spark plugs, attach the boots and cables, and connect the battery.
how do i change the spark plugs on a Chevy silverado 1500
In order to change the sparks plugs in a Chevy Express 3500 van, you should first remove the front tires. This will allow you to get to the front six plugs. The doghouse also needs to be pulled in order to get to the last two spark plugs.
specification on gapping spark plugs for 2006 chevy cobalt
Spark plugs and wires
ALL gasoline engines have spark plugs. Only diesels don't have spark plugs.
Remove the spark plug wires from your 2000 Chevy Impala spark plugs. Remove the spark plugs with a 5/8 deep well socket by turning the socket to the left. Reverse the process to install the new spark plugs.
Chevy Firing Order Check related links below
is the 4.2 ar the v12 hemi
Both V6 engines have 6 spark plugs
4 Spark plugs