0
Depends on the type of sanitizer. Chlorine pools may use Calcium Hypochlorite, Sodium Dichloro-s-triazinetrione, lithium hypochlorite, sodium hypochlorite, Potassium Per-Oxy-Monopersulfate (Non-chlorine shock) and even gas chlorine. Non-chlorine pools may use Hydrogen peroxide, UV bulbs, Electrolosis through titanium plates and many other methods.
What else can I help you with?
Can you mix Super Shock with bleach to get the iron out of pool water?
Absolutely do not mix shock with bleach. there are chemicals specifically designed to remove Iron from the water. Ask your pool supply store. Hatawa
Do you shock a pool or backwash pool first?
Backwash first then shock. If you shock and then backwash you will be throwing away the shock you just put.
What chemicals do you put in your pool after you fill it with water?
After filling your pool with water, you typically add pool shock to disinfect and kill bacteria, algae, and other contaminants. You also add chlorine to establish a residual chlorine level and maintain water sanitation. Additionally, you may need to balance the pH levels of the water using pH increaser or decreaser.
What chemicals should you use in your in ground pool to clean up the yellow water?
Have the water tested to ascertain the cause (organics, iron, etc.) If it is organic (algae, etc) you want to shock the pool with chlorine. If it is iron you want to use a chelating agent, available in your local pool store, to remove the iron from the water before you shock..
What other chemical are in swimming pool water?
Other chemicals in swimming pool water include cyanuric acid (stabilizer), calcium hardness increaser, algaecides, and clarifiers. These chemicals help maintain water quality, prevent algae growth, and keep the pool water clear.
What are the best winterizing chemicals for an above ground pool to ensure it is properly prepared for the winter season?
The best winterizing chemicals for an above ground pool are algaecide, shock treatment, and a winterizing closing kit. These chemicals help prevent algae growth, sanitize the water, and protect the pool during the winter months.
How to use pool shock effectively for maintaining clean and clear water in your pool?
To use pool shock effectively for maintaining clean and clear water in your pool, follow these steps: Test the water: Use a pool water testing kit to check the chlorine and pH levels in your pool. Calculate the amount of shock needed: Refer to the instructions on the pool shock product for the correct dosage based on your pool size and current water conditions. Dilute the shock: Dissolve the pool shock granules in a bucket of water before adding it to the pool. This helps prevent staining or damage to the pool surface. Apply the shock: Pour the diluted shock solution around the perimeter of the pool while the filtration system is running. This ensures even distribution of the shock throughout the water. Wait and test: Allow the shock to circulate in the pool for several hours or as recommended on the product instructions. Test the water again to ensure the chlorine and pH levels are within the desired range. Repeat if necessary: If the water is still cloudy or algae persists, you may need to shock the pool again or consult a professional for further advice. By following these steps, you can effectively use pool shock to maintain clean and clear water in your pool.
What chemicals should you use to treat the water in an inflatable pool so you do not have to empty it every other day?
you should use a chlorine floater, shock it once a week and add algaecide weekly as a preventative.
What chemicals are required for upkeep of above-ground vinyl salt-water pools?
The saline system will eliminate the need to add any sanitizing chemicals (pool-chlorine, algaecides, 'shock' chemicals). Everything else about the water treatment remains exactly the same as for any pool (pH, alkalinity, conditioner, vacuuming etc etc).
How do you shock an intex pool?
3800 gals of pool water shock it with 1 gal bleach
Does pool filters take out the chemicals?
Pool filters are designed to remove impurities from the water, such as dirt, leaves, and other debris that can make the water cloudy or dirty. While pool filters can help improve the overall quality of the water, they do not remove all chemicals. Chemicals used in the pool, such as chlorine, are necessary to keep the water clean and safe for swimmers. Therefore, it is important to regularly test the chemical levels in the pool and make adjustments as needed to maintain safe and balanced water chemistry.
Do you add shock to the pool on top of the water?
Yes; mix the shock with water and pour it into the pool directly in several locations and run the filter.
