Usually sodium hydroxide is used, as it is the cheapest and most commonly available base you will find in chemistry labs.
AgNO3
HCl, hydrochloric acid, is the primary standard used to titrate against potassium hydroxide.
Dissolve approximately 0.25g of Borax in distilled water. Titrate against hydrochloric acid using methyl orange indicator. At end-point, solution should be almost colourless against a white background.
Since they are both acids, you don't usually titrate one against the other. If you want to titrate something, you should use one acid and one base. If one of them is a weak acid/base, the other should be a strong acid/base.So if you want to titrate a solution of acetic acid, use a solution of a known concentration of sodium hydroxide (NaOH) or potassium hydroxide (KOH) instead. You can also use either of those two strong bases to titrate a solution of perchloric acid.
A Titration is a producers which used to determine the concentration of an acid or base.
The reasons KHP is used as a primary standard are as follows: (1) It is not hydroscopic, (2) it has a high molecular weight, so a reasonable amount to titrate can be easily weighed, and (3) it is stable at temperatures over 100°C so that any water may be driven off by heating.
HCl, hydrochloric acid, is the primary standard used to titrate against potassium hydroxide.
Titrate it with a primary standard
Dissolve approximately 0.25g of Borax in distilled water. Titrate against hydrochloric acid using methyl orange indicator. At end-point, solution should be almost colourless against a white background.
My Shaft
Titrate it with a standard base.
A chemical reaction must exist between the titrant an the ion to be analyzed.
Since they are both acids, you don't usually titrate one against the other. If you want to titrate something, you should use one acid and one base. If one of them is a weak acid/base, the other should be a strong acid/base.So if you want to titrate a solution of acetic acid, use a solution of a known concentration of sodium hydroxide (NaOH) or potassium hydroxide (KOH) instead. You can also use either of those two strong bases to titrate a solution of perchloric acid.
titrate water with standard soap solution .End point is when floating bubbles aee stable
The reasons KHP is used as a primary standard are as follows: (1) It is not hydroscopic, (2) it has a high molecular weight, so a reasonable amount to titrate can be easily weighed, and (3) it is stable at temperatures over 100°C so that any water may be driven off by heating.
A Titration is a producers which used to determine the concentration of an acid or base.
buret
A titrant, a titrate and an indicator (if needed).